The contact surface of the die-casting mold is usually called the parting surface, and the parting surface is determined by the parting line of the die-casting part. The joint surface on the mold perpendicular to the clamping force is the basic parting surface. The die-casting type has only one parting surface, and sometimes there may be more than two auxiliary parting surfaces due to complicated castings and the like.

According to the shape of the parting surface, the die-casting parting surface can be divided into four types: straight type, inclined type, step type, and curved type. The straight split surface has a simple structure and is convenient to manufacture. So the application is the most extensive. For the stepped parting surface, the pouring system is generally disposed on one of the step surfaces, and the drainage system is disposed on the other step surface, thereby facilitating the filling and exhausting of the molten metal.
There are many factors to be considered in determining the parting surface. Therefore, when selecting the parting surface, in addition to the structural characteristics of the die casting, the casting system is arranged in combination. It is also necessary to consider and determine various factors such as the processing technology and assembly process of the die-casting mold and the demolding conditions of the die-casting parts. The principle of determining the parting surface is:
When the mold is opened, the casting must remain in the movable mold and be easily taken out of the mold cavity.
(1) The castings must be left in the moving die during opening and easy to be removed from the die cavity.
(2) The parts requiring high precision in different axes and dimensions should be set in the same half-die as far as possible.
(3) The parting surface is generally not set on the surface with high quality requirements.
(4) The setting of parting surface should be conducive to setting up gating system and exhaust system, cleaning burr edge, gate and so on, and brushing paint.
The setting of parting surface should simplify the structure of die-casting mould as far as possible and take full account of the casting properties of the alloy.

